What are the factors that determine the service life of inflatable rushing boats

The decisive factor, which affects the life of inflatable rubber boats is the adhesive tape, which is the condition of its storage and maintenance. In addition, do not exclude the natural wear and tear of the materials used in the production.The average length of life of inflatable boats made of PVC is 16-20 years. The maximum load for the specified life limit can be found in some of the accompanying instructions.

Practice shows that the average life span of inflatable inflatable boats is 12-20 years, but nowadays no boat is found to have a life span of more than 4 years. Worst of all, there are even boats that fail in their first season. Is the durability really so short? Many consumers consider the possibility that the failure occurred during the manufacturing process, at which point they are often wrong and the factory may be using low quality materials or acknowledging that a failure occurred during the manufacturing process. However, do not always blame the manufacturer. It can also happen when we make operational errors, repairs and improper storage accelerates the rate of damage. To prolong the durable service life of a PVC punching boat, it is necessary to strictly observe the usage, reasonable operation, storage and regular maintenance.

For example, over-inflating an inflatable rubber boat makes the gas chamber too large for the gas capacity, and the increased pressure may cause the seams to rupture. Do not forget, too, to inflate the boat in the cold morning, the afternoon is often higher than the morning temperature, which will certainly lead to heating, the gas will expand in the gas chamber, thus increasing the pressure, so when inflating the boat in the cold morning, also can not be excessive, preferably 90% can, otherwise the side expansion will lead to fabric breakage, the boat's buoyancy greatly reduced the situation.

It is also important to avoid moisture in the rubber boat air chamber, because it will cause attenuation made of cotton fabric, which causes the rubber coating to come off the textile base shell. This in turn reduces the internal diaphragm and reduces the strong durability of the internal partitions. It is also not possible to store an un-dried ramjet boat or to store it in a damp, poorly ventilated chamber. In order to prevent water from entering the interior when cleaning the hull, the inflatable valve should be opened and closed before cleaning, water can enter the internal pair of air chamber by the valve. Water can also accumulate in the inflatable hose, so you should shake off the water before inflating.

Decide the durability of the inflatable rubber boat is not entirely due to the manufacturer's use of poor quality materials, or its own quality defects, it can be said that this will only affect half of it, the remaining half is caused by your purchase. No matter how good the material is, if you don't pay attention to the operation specification and regular maintenance, the durability will be greatly shortened as usual. In order to use the boat you bought for a longer time, please maintain it well.